Electronic Sub Units (Audio)

PARTRIDGE

Email: sales@partridgeelectronics.co.uk

ELECTRONICS

54-56 Fleet Road, Benfleet, Essex. SS7 5JN

SECTION 6	ELECTRIONIC CONSTRUCTOR KITS & MODULES
	*LCD MODULES LIGHTING EFFECTS * MESSAGE DISPLAYS**
	*** MINI KITS * RECORDING DEVICES * REMOTE CONTROL**
	* ROBOT KITS * SENSING DEVICES * TIMERS * CONTROLLERS

MILFORD Assembled & tested

Supertwist LED backlit alphanumeric LCD

2 x 16 x 5.56mm Overall size:-72x36

Viewing area:- 61 x 15.5 mm Backlight current:-165mA

Order code:-6-MK00582 Price:-£21-48

4 x 20 x 4.75 Overall size:-98 x 60mm

Viewing area:- 76 x 25.2mm Backlight current:-375mA

Order code:6-MK00585 Price:-£44-67

STANDARD PARALLEL

LCD MODULE

MILFORD Assembled & tested

Supertwist LED backlit alphanumeric LCD

2 x 16 x 5.56mm Overall size:-72x36

Viewing area:- 61 x 15.5 mm Backlight current:-165mA

Order code:-6-MK00587 Price:-£37-19

2x 20 x 5.55 Overall size:-116 X 37mm

Viewing area:- 83 X 18.6mm Backlight current:-285mA

Order code:-6-MK00588 Price:-£47-41

SERIAL INTEFACE

LCD MODULE

WITH BPK BOARD

FRONT BEZELS FOR USE WITH:-MILFORD MODULES

6-MKOO592 for use with 6-MK00582 or 6-MK00587

Price:- £13-96

6-MKOO593 for use with 6-MK00583 or 6-MK00588

Price:- £15-65

6-MKOO595 for use with 6-MK00585 or 6-MK005890

Price:- £17-34

6-MKOO596 for use with 6-MK0058 or 6-MK00591

Price:- £18-56

LCD MODULE

Assembled & tested

Cool BLUE LCD's available in 2 sizes

2 x 16 x 5.56mm Overal size:- 80 x 36mm

Viewing area:- 64.5 x 16.1 mm

Order Code:- 6-MK00858 Price:-£27.18

2 x 20x 5.55mm Overal size:- 116 x 37mm

Viewing area:- 83 x 18.6mm

Order Code:- 6-MK00859 Price:-£36-00

PARALLEL

LCD MODULE

Assembled & tested

Cool BLUE LCD's available in 2 sizes

2 x 16 x 5.56mm Overal size:- 80 x 36mm

Viewing area:- 64.5 x 16.1 mm

Order Code:- 6-MK00861 Price:-£49-00

2 x 20x 5.55mm Overal size:- 116 x 37mm

Viewing area:- 83 x 18.6mm

Order Code:- 6-MK00862 Price:-£51-00

SERIAL INTEFACE

LCD MODULE

FRONT BEZELS FOR USE WITH:

-MILFORD COOLE BLUE MODULES

6-MKOO592 for use with 6-MK00858 or 6-MK00861

Price:- £13-96

6-MKOO593 for use with 6-MK00859 or 6-MK00862

Price:- £13-96

LCD MODULE

1W / 3W LCD DRIVER PARTS KIT

Powers up to 4 x 1W or 2 x 3W high-power LED's

Delivers accurate, constant current required by most high-power LED's

High eficency due to switch mode principle

Built in rectifier for easy connection to AC source

Short circuit protected - No heat sink required

Also suites as fixed current NiCd/NiMH battery charger circuit

Input voltage:- 6 - 12V ac / 9-18V dc @ 650mA

Size:- 45 x 30 x 16mm

LCD DRIVER

Code:-6-MK01052

Price:-£7-80

SOUND TO LIGHT PARTS KIT

Your own lighting effect reacts to 3 t bands of sound

Low * Mid * High channels

Built in microphone for greater flexibility

LED status indicator for each channel

Suitable for incandescent light bulbs only

Operating Voltage 110 - 125 or 220 - 240 V ac

Max. load per channel 200W

Size:-155 x 45 x 160 mm

SOUND TO LIGHT

Code:-6-MK00760

Price:-£46-70

Assembled & tested

DMX 512 Transmitter

Full specification DMX transmitter with PC control

& scene storage & switching options.

Will generate & sustain full 512 channelsof DMX network

Data uploaded via serial Rs232 link

Can store up to 15 x 512 channel scenes

Can be switched with simple RS232 command

Scene stored in non volotile memory

Supply:- 9V dc DMX output via 5 pin XLR connector

Supplied with a comprehensive data sheet

Power:- 9V dc Size:- 86 x 36 x 85mm

TRANSMITTER

Code:-6-MK00997

Price:-£104-58

Assembled & tested

DMX Receiver

Build your own special effects unit.

Receiver has 8 output pins outputs

suitable for driving RC type servos

or Triac lamp Dimmers Base adress

of module may be st from 8 - 248 with jumpers

Power:- 9V dc Size:- 90 x 40 x 90mm

DMX RECEIVER

Code:-6-MK00857

Price:-£78-16

PARTS KIT USB Controlled DMX Interface Kit

USB controlled DMX interface will control lighting

effects units using a PC & USB interface. Test software &

DMX" Light Player" Software is supplied & a Dynamic

Link Library (DLL) is providedto write your own

software. Stand alone test outputs all 512 channels

Kit includes:- DMX interface , USB cable,CD-ROM

Connected & powered throgh USB port.

3pin XLR DMX output connector. Windows 98SE

or higher DLL included to write own software

PCB size:- 100 x 82 mm

DMX MODULE

Code:-6-MKDP28135

Price:-£64-38

PARTS KIT USB Controlled DMX Interface Kit

USB controlled DMX interface will control lighting

effects units using a PC & USB interface. Test software

& DMX " Light Player" Software is supplied & Dynamic

Link Library (DLL) is provided to write your own

software. Stand alone test outputs all 512 channels

Kit includes:- DMX interface , USB cable,CD-ROM

Connected & powered throgh USB port.

3pin XLR DMX output connector. Windows 98SE

or higher DLL included to write own software

PCB size:- 106 x 101 x 44 mm

DMX MODULE

Code:-6-MK01046

Price:-£83-51

Assembled & tested DMX Switch

Single pole change over relay rated at 250V

ac @10 Amp For controlling simple on - off

equipment from DMX network.Base adress may

be set between 1 and 512 Works with full

speed DMX signal stream .

LED indicates relay & valid DMX signal status.

Requires 12V dc

Size:-75 x 25 x 40 mm

DMX MODULE

Code:-6-MK00998

Price:-£48-86

Assembled & tested

DMX Servo Controller

Single channel controller for standard R /C servo motors

current not exceeding 600mA - Requires 1 DMX per channel

Generates servo control pulses between 1ms and 2ms

Base adress may be set between 1 and 511

LED's indicate relay & valid DMX signal status

REquires:- 7.5 to 9V dc supply

Size:- 70 x 15 x 42 mm

MODULE

Code:-6-MK00999

Price:-£48-86

Assembled & tested

DMX to Voltage Converter

Four channel DMX to Voltage ( 0 - 10V) converter

with base adress selectable between1 and 509

for use on standard DMX512 networks.

Four channel outputs (0 - 10V dc ) 8 bit resolution

& 20mA drive5 pin XLR DMX in & feed

through connectors. 12Vdc input

DMX signal status LED

Board size:- 70 x 30 x 100 mm

DMX MODULE

Code:-6-MK01000

Price:-£60-97

Assembled & tested

DMX PWM Stepper Driver Board

DMX PWM Stepper driver board may be configured

to provide 4 channelsof 8 bit PWM suitable for

driving LED displays (eg RGB & White) or with flick

of the on-board DIP switch t generate full wave

signals to drive unipolar stepper motors PWM

update 2KHz at 8 bit. Step speed 0.5ms &128ms/

step Base adress settable 1 to 509. MOSFET

output drivers. 5pin XLR DMX in feed & feed through

Supply:- 9 -12Vdc Board size:- 115 x 30 x 70mm

DMX MODULE

Code:-6-MK01001

Price:-£77-81

Assembled & tested

8 Channel DMX Relay Receiver Board

Create & control your own effects over DMX network

witht this 8 channel digital output receiver board.,

once base adress is set,relay outputs may be

controlled from standard DMX control desks.

All outputs provided with 30V dc @ 2A relays

Base adress may be set to between 1 and 505

XLR-3 input and output sockets.

Size:- 135 x 30 x 90 mm

DMX MODULE

Code:-6-MK00855

Price:-£85-34

Assembled & tested

DMX Video Switch Board

This DMX Vidio switch board can switch one of

up to four standard composite video inputs

( PAL or NTSC) to one output channel under

DMX control. Requires 1 DMX data channel

Adress settable betwen 1 & 511

Video connections via BNC & 5pin

XLR DMX input & feed through.

Requires 9 -12Vdc Size:- 135 x 30 x 90 mm

MODULE

Code:-6-MK01003

Price:-£99-00

Assembled & tested

DMX DC Motor Control Board

Board may be used to control standard DC motors rated at up to 5A & 24V dc

Board may be configured for simple speed & forward / reverse control or with

addition of feed back potentiometer, for servo positional control. On board pre-set

allows motor to be controlled locally., base adress may be set between 1 & 510

5 pin XLR DMX in and feed through connections.

Requires 12V dc for the drive electronics

DMX MODULE

Code:-6-MK01002

Price:-£141-88

FIXED MESSAGE LED DISPLAY PARTS KIT

Create your own message for personal advertising

150 bright LED's

12 character positions

5 x 7 LED matrix for each character

Output for syncronisation with other displays

Operating voltage:-12-28 V dc @760mA

Size:-473 x 80mm

Display housing Order code:- 6-MK00808 Price:- £19-20

MESSAGE

MODULE

Code:-6-MK00751

Price:-£48-58

FLASHING LED's PARTS KIT

An ideal project for model makers.

This simple kit flashes 2 LED's on and off.

Flash rate can be adjusted via 2 pot's

Supply:- 9V dc @ 8 mA

Size:- 30 x 35 x 15 mm

LED MODULE

Code:-6-MK00731

Price:-£7-62

SOUND TO LIGHT PARTS KIT

Kit features a built-in Microphone & 4 Highly visual LED's

works as a simple sound to light unit for music or as a

sound indicator.An ideal kit for the hard of hearing to

indicate a doorbell, telephone ringing or a barking dog.

Sensitivity adjustable via on board pre-set.

Supply:- 8 - 15 V dc @ 12mA

Size:- 40x 55 x 35 mm

Code:-6-MK007323

Price:-£7-99

SIGNAL GENERATOR PARTS KIT

Signal output:- Sine - Square & Triangle

wave output. On board jumper selectable.

Signal frequency 1KHz aproximately.

Output Level: adjustable 0 -100mV rms

On board level set pot.

Supply:- 8 - 15 V dc @ 20mA

Size:- 40x 56 mm

Code:-6-MK00716

Price:-£7-49

LED RUNNING LIGHT PARTS KIT

A running light kit with 8LED's and differentlight effects

selectable by the PROG push button. The speed of the

effects can be adjusted via the SPEED potentiometer.

With power stand-by push button (OFF push button)

Supply:- 8 - 15 V dc @ 20mA

Size:- 95x40 mm

Code:-6-MK00718

Price:-£8-10

STEREO VOLUME CONTROL PARTS KIT

MODULE

Code:-6-MK00966

Price:-£16-70

POCKET V. U. METER PARTS KIT

Surprise your friends in the Disco with

this pocket VU meter with 5 LED's.

LED's move to rhytham of the music

Incorporates integral Microphone

Adjustable sensitivity + ON / OFF switch

Supply:- 3v Type CR2032 battery ( NOT SUPPLIED)

Size:- 87 x 50 x 25mm

Complete with outer case as illustrated

MODULE + CASE

Code:-6-MK00964

Price:-£10-89

PARTS KIT

ELECTRONIC DICE

ELECTRONIC DICE WITH LED

ROLLS OUT SLOWLY WHEN WHEN THE PUSH

BUTTON IS RELEASED

Code:-6-MK00834

Price:-£7-80

KIT

PARTS KIT

ADJUSTABLE TIMER WITH RELAY OUTPUT

Kit designed for intermitent operation of equipment.

such as video and photo single frame shooting,

blinking lights , slide projector control, minature models.

5A output relay with dry switch contact.

pulse time adjustable from 0.5 to 5 seconds

pause time adjustable from 2.5 to 60 seconds

Power supply:- 12V dc @ 100mA Size:- 85 x 40mm

MODULE KIT

Code:-6-MK00721

Price:-£8-43

ELECTRONIC GAME PARTS KIT

Aim of electronic game is to repeat a random pattern

generated by 4 red LED's by pressing corresponding

4 push buttons. You can select pattern generated

either visually & audibaly or visually only.Game has

4 diffulty levels replay speed will gradually increase

during the game, making it even more challenging.

Power supply:- 3 x AA batteries ( NOT SUPPLIED)

Size:- 65 x 50mm

MODULE KIT

Code:-6-MK00722

Price:-£10-77

SIREN SOUND GENERATOR PARTS KIT

A kit that generates four different

types of sounds Police siren,

Fire engine, Emergency vehicle

& Machine gun.

RV one adjusts sound pitch.

ON / OFF switch and Speaker

are all included in the kit.

Power supply:- 9V PP3 battery ( NOT SUPPLIED)

Code:-6-MK00726

Price:-£9-43

POCKET SOUND LEVEL PARTS KIT

An easy to build kit that works as a

simple basic sound level meter.

Five Red LED's

Includes own on board Microphone

Provided with on board Sensitivity control

Power supply:-3V CR2032 battery ( NOT SUPPLIED)

MODULE KIT

Code:-6-MK00725

Price:-£7-68

F M RADIO PARTS KIT

Enjoy fun of building & listening to FM radio

Easy to assemble NO coils to wind

One single adjustment Pre-assembled FM front end

Receives ful FM waveband 88/108MHz

LED indicator

ON/OFF switch, volume control

Power supply:- 12V dc @ 100mA Size:-125 x 85mm

MODULE KIT

Code:-6-MK00 810

Price:-£22-50

BEAM BREAK DETECTOR PARTS KIT

Allows you to create an infrared "barrier"

between Transmitter & Receiver units.

If beam is broken receiver sounds an alarm & an