PARTRIDGE
ELECTRONICS
54-56 Fleet Road, Benfleet, Essex. SS7 5JN
SECTION
15
PCB COMPONENTS
& SOLDERING EQUIPMENT
DRAUGHTING FILM
VERO BOARD
ETCHING SOLUTION
BREAD BOARD
PCB TRANSFERS
UNIVERSAL DEVELOPER
TINNING POWDER
TIEPOINT BOARD
PHOTO RESIST BOARD
STRIP BOARD
TUNGSTEN DRILL BITS
ETCHING CRYSTALS
COPPER CLAD BOARD
SENSITISED BOARD
PCB SUPORTS
ETCH RESIST PENS
INDEX PAGE                 ENQUIRY FORM                 ORDER FORM                 GENERAL INFO
 
BOARD DESIGN AND PREPERATION
For use with EPSON
inkjet printers for master
artwork productiion
Size:-210 x 297mm
Order Code-15-0374
Price- £9-13
( 10 sheets)
DRAUGHTING FILM
Self adhesive copper track
0.25 mm wide. x 33m
In handy dispenser.
Cost efective prototyping.
Order Code-15-J059
Price-£5-95
COPPER TRACK
P2539
ETCH RESIST PCB TRANSFERS
High quality etch resist PCB symbols for appling
to drafting sheets or direct to PCB copper.
Order Code
Description
1+ Price
10+ Price
15-0022
Assorted Symbols
£3-08
£2-90
15-0023
Round pads assorted
£3-08
£2-90
15-0025
DIL and SIL pads
£3-08
£2-90
15-0027
Straight tracks 1.5 mm
£3-08
£2-90
15-0026
Tracks and curves 1.5 mm
£3-08
£2-90
 
FR4 PHOTO RESIST COATED BOARD
Single or double sided copper clad epoxy glass board
with positive working photo resist coating.
Protected with peel off black plastic film.
Base laminate conforms to BS4584 part 3.
Order Code
Description
Single/Double Sided
Price
15-J250-071
100 x 160mm
Single Sided
£4-20
15-J250-076
100 x 220mm
Single Sided
£5-60
15-J250-088
305 x 457mm
Single Sided
£28-60
15-J250-091
100 x 160mm
Double Sided
£4- 80
15-J250-096
100 x 220mm
Double Sided
£6-80
15-J250-108
305 x 457mm
Double Sided
£34-00
P2540
840 contacts-2 blocks
64 vertical rows of 5
interconect sockets
4 horizontal rows of 50
interconect sockets
STANDARD 0.1 pitch
840 SOLDERLESS
TIE POINT BREADBOARD
Order Code-15-1211
Price-£5-60
STRIPBOARD CUTTER
ENABLES ACCURATE
& SIMPLE TRACK
CUTTING ON ALL
NORMAL TYPES OF
STRIP BOARD
SPOT FACE
Order Code-15-066

Price- £10-28
 
Pierced to accept
terminal pins punched
on 0.1" pitch (2.54mm)
Ideal for prototyping a simple form of circuit.
STRIPBOARD STANDARD
COPPER TRACK BONDED TO LAMINATED BOARD
Order Code
Description
Strip/Holes
Price
15-J500-060
100 X 100mm
39/38
£2-40
15-J500-065
100 X 160mm
39/63
£3-50
15-J500-070
100 X 500mm
39/199
£11-50
 
PLAIN COPPER BOARD
Single or double sided 1.6mm copper clad board
May be etched with all normal chemicals
as used to etch normal" Photo Resist" boards.
Order Code
Single /Double sided
Description
1+ Price
10+ Price
15-P250-025
Single
56 X 175mm
55p
45p
15-P250-027
Single
65 x 168mm
60p
50p
15-P250-029
Single
70 x 168mm
60p
50p
15-P250-031
Single
125 x 175mm
80p
70p
15-P250-033
Single
130 x 180mm
90p
80p
15-P250-036
Double sided
110 x 159mm
£1-30
95p
15-P250-037
Double sided
119 x 124mm
£1-25
90p
15-P250-038
Double sided
102 x 166mm
£1-20
£1-05
15-P250-039
Double sided
116 x 144mm
£1-35
£1-20
15-P250-040
Double sided
105 x 161mm
£1-30
£1-15
15-P250-041
Double sided
115 x 200mm
£1-30
£1-15
15-P250-042
Double sided
116 x 145mm
£1-35
£1-00
15-P250-043
Double sided
116 x 145mm
£1-35
£1-20
15-P250-044
Double sided
160 x 190mm
£2-15
£1-95
15-P250-045
Double sided
150 x 338mm
£3-90
£1-80
15-P250-046
Double sided
157 x 189mm
£2-25
£2-05
15-P250-047
Double sided
100 x 200mm
£1-60
£1-05
15-P250-048
Double sided
121 x 167mm
£1-60
£1-45
15-P250-049
Double sided
117 x 157mm
£1-35
£1-20
15-P250-050
Double sided
125 x 255mm
£2-50
£2-30
15-P250-051
Double sided
110 x 185mm
£1-70
£1-55
15-P250-052
Double sided
115 x175mm
£1-60
£1-45
15-P250-053
Double sided
105 x165mm
£1-30
£1-15
15-P250-054
Double sided
70 x 170mm
£1-05
90p
15-P250-055
Double sided
170 x 193mm
£1-20
£1-05
 
MATRIX BOARD
NO drilled holes
0.1"copper strip
grid board track
marked not pierced
Size:-182 x 130mm
Order Code:-15-023
Price:- £1-40
NO drilled holes
copper patern board
tracks marked not
pierced on 0.1" grid.
marked not pierced
Size:- 240 x 190 mm   
Order Code:-15-021
Price:- £2-20
MATRIX
BOARD
 
NO drilled holes
0.1copper strip
grid board track
marked
not pierced
Order Code:-15-022
Price:- £1-00
MATRIX
BOARD
Size:- 130 x 60 mm   
NO drilled holes
0.1copper strip
grid board track
marked
not pierced
Order Code:-
15-022H
Price:- £3-00
MATRIX BOARD
3mm EXTRA HEAVY DUTY
Size:-230x 160 x 3.0 mm   
 
BOARD CREATION
UV EXPOSURE UNIT
A low cost compact unit with 6 minute timer,
for exposing photo resist PCB copper boards
may also be used to process labelling material.
Supplied with 2m. mains cable all controls on front.
Exposure area 229 x 159 mm
Order Code
Description
Price
15-0004
Exposure area 229 X 159mm
£133-00
15-0240
Spare 12" Tube
£8-30
15-50375
Larger unit area 330 x 260
£263-00
15-50376
Spare 18" Tube
£9-20
 
PCB  DEVELOPING
TANK
Suitable for Developing -
Resist strip rmoval-
immerse tinning
boards up to 320 x 260mm
Built in thermostat temperature adjustable 10-65°
Neon indicates when mains heater is operative
A smart easy to use and clean unit
Order Code:- 15-026
 Price:- £230-00
PCB   BUBBLE
ETCHING TANK
Suitable for boards
up to 320 x 260mm
Built in pump forces Air
through two bubble bars
this facility provides eficient even etching of board
Integral thermostat temperature adjustable 40-45°
Neon indicates when mains heater is operative
Order Code:- 15-027 Price:- £265-00
 
HOME ETCHING SYSTEM
*  COMPLETE READY TO USE SYSTEM FOR CLEAN AND EFFICIENT
ETCHING OF "one-off" PCB`s. IDEAL FOR THE HOME USER
*  THE ENTIRE PROCESS TAKES PLACE INSIDE A SEALED SYSTEM
AVOIDING DANGER OF DAMAGE TO THE HOME OR PERSON
*   .EACH KIT CONTAINS A SEALABLE ETCHING BAG -
ETCH CHEMICALS IN PELLET FORM - LEAKPROOF STORAGE BOX
*  A NEUTRALISER ENABLES KIT
WHEN EXHAUSTED TO BE DISPOSED OF SAFELY IN DUSTBIN
Kit will etch aprox. 1600cm. of copper laminate.
Order Code:- 15-J435                                          Price:- £13-55
 
ETCHING SOLUTION
250ml Feric Cloride
copper etching solution for use
with copper clad circuit boards
Order Code:- 15-0044       Price:- £7-89
PCB ERASER /
CLEANER SCRUB BLOCK
Silicone rubber block embeded with
ultrafine non metallic abrasive
for perfect instant cleaning and
polishing of copper clad boards
Code:- 15-0030  Price:- £3-48
 
DEVELOPER SOLUTION
A free from sodium hydroxide developer
Reduces risk of under cutting
or thining of photoresist.
Concentrated developer 500g
Order Code
15-J250-350
Price
£14-30
 
ETCHANT SOLUTION
New cleaner etchant solution superior to standard ferric
chloride. This Etch solution ideal for copper clad boards.
Solution remains clear and does not crystallise.
Will make aproximatly 5 Litres of solution.
Order Code:-  
15-357
Price:-
£27-00
 
RESIST STRIP SOLUTION
A strong alkeline stripper fast acting,
to reveal a residue-free bright copper surface.
.Requires only washing off with water.
Concentrated Strip Solution 1.ltr
Order Code:-  
15-J360
Price:-
£26-00
 
IMERSE TIN POWDER
A new and unique stable immerse tin powder
which is mixed in warm water allowed to cool
and then used at normal room temperature.
Sufficient to make 5 Ltr.
Order Code:-  
15-0250
Price:-
£59-00
 
PROCESSING TRAYS
Specifically designed for
PCB work chemicals
Trays 313 x 58 x 264 mm
Order Code:- 15-0095
Price:- £13-32 (3 trays)
Mark or repair copper
boards before etching
red-gren-blue-black
Order Code:-15-313
Price:- £6-70 ( set of 4 )
ETCH RESIST PCB
MARKER PEN
 
BOARD DRILLING AND CUTTING
Size:-
Order Code:-
Price:-
0.5 mm
15-00036
£3-99
0.8 mm
15-00038
£4-30
1.0 mm
15-00040
£4-30
1.2mm
15-00042
£4-28
1.4mm
15-00190
£4-30
A RANGE OF HIGH GRADE DRILL

BITS WITH 1/8" SHANKS. WILL
REMAIN SHARP SIGNIFICANTLY
LONGER THAN STEEL DRILLS
SHOULD BE USED AT HIGH SPEED
TO PRODUCE GOOD QUALITY
HOLES AND AVOID BREAKAGES
TUNGSTEN CARBIDE
PCB DRILL BITS
P2544
BOARD HARDWARE
TERMINAL PINS
Single and double pins for use with stripboard.
Order Code
Description
1+ Price
10+ Price
15-J500-080
Single Sided
72p (100 pack)
58p (100 pack)
15-J500-081
Double Sided
£1-28 (100 pack)
£1-13 (100 pack)
 
P.C.B. BOARD SUPPORTS
Size:-Height total 28mm
Height (spigot-spigot)10mm
Width 10mm  Depth 20mm
Order Code:-15- 5431
1+ Price 5P     10+ Price 4P
Size:-Height total 25mm
Height (base-latch)12mm
Width 7mm  Depth 12mm
Order Code:-15- 5289
1+ Price 5P     10+ Price 4P
 
BOARD BUILDING
SOLDER AID KIT
SOLDER DISPENSER
SOLDER MOP
IRON TIP CLEANER
Kit contains :- Fork /
Needle point - Hook/ knife
Wire brush/- Scraper -
Tweezers
Code:-15-0324
Price:- £3-90
Accepts up to 500g
reels of solder
Code:-15-0324
Price:- £3-90
2.0 mm wide x
aprox.5 feet
desoldering braid
Code:-15-0324
Price:- £3-90
low abrasive brass
Anti slip pad on base
Adjustable Iron rest
Order code:-15-1015
Price:-£5-60
P2197
 
DESOLDERING PUMP Cliff Fume Extractor IRON BENCH STAND
IRON LIGHT SOURCE
Removable nozzle
Double O rings
Order Code:-
15-J845-085
Price:-£2-50
Spares for above
Desolder nozzle
Order Code:-
15-J845-086
Price:- 95p
Desolder washer
Order Code:-
15-J845-087
Price:-42p
Fitted with charcole filter
Order Code:-15-3201
Price £65-00
Spare filters pack of 5
Order Code:-15-3202
Price £12-36
Factory re-cond units
One year guarantee
Code:-15-3203
Price £35-00
ANTEX MODEL ST4
Code:-15-1001   Price:-£3-95
Lamp for RS battery
Soldering Iron
Order code:-15-50
Price:-£1-90
SOLDERING AID
Contents Brush - Scraper
Hook - Fork - Spike -Knife
Code:-15-140 Price:-£4-60
 
 
Used EX Factory use
PHILIPS TOOL TRAY
WITH IRON STAND
Size :- 30 cm x 30 cm
Order code :- 10-ST11
Price :- £13-00
Used EX Factory use
HARDENED RUBBER
BENCH MAT
Size :- 57 cm x 57 cm
Order code :- 10-ST12
Price :- £15-00
 
ANTEX MODEL CS 18W
Super low leakage inner ceramic shaft with outer
stainless steel shaft leakage current less than 2 uA
The ideal iron for use with extremly small work.
Iron fitted with PVC lead and 13A plug top..
Order Code:- 15-0006
Price £14-70
ANTEX MODEL XS 25W
A higher wattage general purpose low
leakage iron giving more heat disipation for
use with standard size electronic components
Order Code:-15- 0011
Price £14-31
 
SOLDERING IRON BITS
Order Code:-
M Code
For use with
Bit style
External Size:-LxW
 Internal Size:-
Tip
Price
15-34DT30
C0388
Duratool Station
48x5mm
Solid
3.0mm
£2-00
15-35DT15
C0385
Duratool Station
48x5mm
Solid
1.5mm
£2-00
15-36DT12
C0389
Duratool Station
48x5mm
Solid
1.2mm
£2-00
15-37NN15
---
Not known
55x6.5mm
4.5mm
1.5mm
£2-50
15-38NN10
---
Not known
50x5mm
3.5mm
1.0mm
£2-50
15-39NN20
---
Not known
50x5mm
3.5mm
2.0mm
£2-50
15-40NN40
---
Not known
52x4.5mm
3.5mm
4.0mm
£2-50
15-42NN45
---
Not known
43x5.0mm
Solid
4.5mm
£2-50
15-41NN30
---
Not known
28x3.0
Solid
3.0mm
£2-50
15-43NN30
---
Not known
28x3.0
Solid
3.0mm
£2-50
15-47NN45
---
Not known
53x6.5mm
4.5mm
4.5mm
£2-50
15-42RS30
R544-875
RS. iron
55x9.5mm
Solid
3.0mm
52P
15-42RS50
R544-875
RS. iron
55x9.5mm
Solid
5.0mm
52P
15-38NT10
J845-066
Antex XS
60x8mm
4.5mm
1.0mm
£2-90
15-38OT10
J845-066
Antex XS
60x8mm
4.5mm
1.0mm
£2-50
15-45OT23
J845-062
Antex XS
60x8mm
4.5mm
2.3mm
£1-75
15-47NT23
J845-062
Antex XS
60x8mm
4.5mm
2.3mm
£1-95
15-45OT30
J845-063
Antex XS
60x8mm
4.5mm
3.0mm
£1-75
15-47NT30
J845-063
Antex XS
60x8mm
4.5mm
3.0mm
£1-95
15-47NT47
J845-064
Antex XS
60x8mm
4.5mm
4.7mm
£2-50
 
SOLDERING IRON ELEMENTS
Order Code:-
M Code
For use with
Element style
Size:-LxW
 Voltage
Wattage
Price
15-33EL C1114

Duratool Soldering station

 --- 24V ac 48W £2-39
15-58ELT R545008 RS Battery iron Fine tip Battery 15W £7-00
15-58ELS R545008 RS Battery iron Standard tip Battery 15W £6-00
15-51EL J845053 ANTEX XS --- 230V 25W £5-80
15-60SOL --- For SOLEN irons 33 x 9mm 220/240V 25w £2-00
15-5410 --- Light Soldering Irons 90 x 6mm 12V 10W £2-00
15-5420 --- Light Soldering Irons 105 x 8mm 240V 20W £2-00
15-5535   Light Soldering Irons 145 x 12mm 240V 35W £2-00
15-56ADC 123

For use with ADCOLA Iron

 

 For 5mm bits 230/240 --- £4-60
15-57110 123 Not known 95 x 10mm 110/125 --- £2-00
15-57220 123 Not known 95 x 10mm 220/240 --- £2-00
 
HOME SOLDERING SYSTEM
STARTER KIT IDEAL FOR THE HOME USER
Two Mini Kits:-Flashing LED`s cat.CHK00731
& Sound to light kit cat.CHK00723
Soldering Iron & Stand & solder
Precision Cutters
Includes everything to build the kits
Order Code    15-HK809 Price       £19-99
g r e a t   v a l u e
 
LEAD FREE ERSIN 399
Multipurpose solder
Confirms to BS219 99c
1.2mm - 18 swg - .048"
Order Code:-15-1716
10g REEL Price:-£3-18
Order Code:-15-1717
30g REEL Price:-£7-52
CORED SOLDERS 60 / 40 FLUXCORE
High quality 5 flux core
60% tin, 40% lead alloy
Manufactured to BS219
Non - corosive flux
Code:-
SWG
Weight
Price
15-J845-004
18
44g
£2-90
15-J845-005
22
30g
£2-56
15-J845-001
18
500g
£12-46
15-J845-002
20
500g
£12-28
15-J845-003
22
500g
£11-95
P2179
DURATOOL
SOLDERING STATION
Temperature controlled Iron
°C and °F temperature
Safe low voltage Iron
Order Code:-15-1113 Price:-£46-00     
TECHNICAL DATA
Temp sett range:- 150°-420°C
Tolerence:- +/- 5°C
Power output:- 48W
Iron lead length:-1.1M
Supply volts:- 220-240V ac
P2199
Spares for above soldering station
Order code
Price
Soldering Iron
15-1114
£6-90
Sponge
15-1118
£1-90
 
SERVISOL  AIDS
SWITCH
CLEANER
Order Code:-
15-JP990-005
Price:-£3-45
CIRCUIT
FREEZER
Order Code:
15--JP990-015
Price:-£6-30
FREEZER
lt25
Order Code:
15--JP990-017
Price:£10-20

 
ANTISTATIC
FOAM CLEANER
Order Code:-
15-JP990-021
Price:-£3-30
PLASTIC
SEAL
Order Code:-
15-JP990-040
Price:-£5-10
ANTI-STATIC
SPRAY MIST
Order Code:-
15-JP990-025
Price:-£2-95

Have you visited our other sections

INDEX PAGE        ENQUIRY FORM          ORDER FORM        GENERAL INFO

Copyright © 2007 Partridge Electronics